PREMIUM IP CAMERA TESTER

Premium IP Camera Tester

IPC-T705

High intensity, fully fitted 7inch LCD screen
Full HD Resolution (1920*1080)
TPE soft glue material, Anti-drop design
Silicone button

Various Top Interfaces

① 12/2A output jack: Outer diameter:4mm,Inner needle: 1.65mm)
② MICRO USB jack: Used to connect with computer host
③ USB HOST extension interface
④ RS485 control output: Used for PTZ control
⑤ Analog video input BNC connector
⑥ Analog video output BNC connector
⑦ Fiber connector for optical power meter
⑧ Network port 1 (blue), with POE power supply output function
⑨ Network port 2 (green), with POE power supply input detection function, also used as the device charging input port
⑩ LED lighting (flashlight)

Various Bottom Interfaces

① RESET→ “Reset” buton: If necessary, use a ball-point pen or other appropriate small tools to press down the keys inside the small hole to restart the tester.
② AUDIO→ Audio input port: 3.5MM Audio input port.
③ DC12→ CHARGE 12V2A charging interface
④ DMM FUSE→ Multimeter fuse:Replaceable
⑤ DMM, Headset and extension interface
⑥ DMM, Measuring current (ACI DC)
⑦ DMM, Common interface
⑧ DMM, Measure woltage (AC1 DC), resistance, capacitance, diode, and circuit ON/OFF.
⑨ OUTPUT HDMI→ Output HDMI test signal
⑩ IN PUT HDMI→ Input HDMI test signal

① Right (NO 2) battery cover buckle
② Left (N0.1) bttery cover buckle
③ Foldable WIFI antenna
④ Foldable spectrum antenna
⑤ Device stand
⑥ Circuit heatsink

Product Function

Specification

Model	IPC-T705
IPC test
IPC protocol	ONVIF, RTSP, RTP
Ethernet test	10M/100M/1G Ethernet link detection; Ethernet loop detection; DHCP client and server; Ethernet traffic detection, data link quality detection.
IPC test	Discovering the device, real-time video, camera configuration, PTZ test,discovering ONVIF device cross the network segment.
IPC image test	H265/H264 decoding, support 4K@30FPS, local zoom preview (at 8levels).
Interface	Dual-port RJ45 Ethernet 1Gbps, support serial connection;
WI-FI test
WIFI test	Support 2.4G and 5G frequency band, WIFI connection, WIFI list, WIFI information detection, delay detection, test of packet loss rate.
Spectrum test	Support 2.4G and 5G frequency band, spatial frequency band signal scanning and detection, and spatial noise (interference) signal detection.
Signal monitoring	Support 2.4G and 5G frequency band quick monitoring of signal change,refresh frequency: 1-10Hz.
Antenna type	External foldable dual antenna. Dual band Dipole omnidirectional antenna
POE test
PD test	The tester receives the power. 802.3at; power supply voltage detection
PSE test	The tester supplies the power. 802.3at;25.5Wmax, PD actual power detection
Analog video test
Video format	NTSC/PAL/HD-CVI3.0 standard /AHD3.0 standard /HD-TVI3.0 standard
Video signal	1Vpp
Video input /output	Video IN BNC input, Video OUT BNC output
Video digital zoom	Support the zoom at 8 levels
Video signal generator	Sending PAL/NTSC video test signal, sending CVI, AHD and TVI video test signal (720P/1080P).
HDMI signal test
HDMI Input	Can receive 720P 25/30/50/60Fps,1080P 25/30Fps input signals for display
HDMI Output	Can output various formats of test images( 720P 25/30/50/60Fps,1080P25/30Fps)
12V power output
Power output	12V/2A output Interface: Round, external diameter 4mm; Internal needle :1.6mm
Audio test
Audio test	1 x Audio signal input
Coaxial PTZ control test
Communication interface	Video IN BNC interface
Communication protocol	CVI protocol (dahua coax), AHD protocol (Pelco c) and TVI protocol(Hikvision)
485 PTZ control test
Communication interface	RS485
Communication protocol	More than 30 protocols, including Pelco-D/P, Samsung, Panasonic, Lilin and Yaan
Baud rate	150, 300, 600, 1,200, 2,400, 4,800, 9,600 and 19,200bps
LED lighting(flashlight)
Head LED	2 x 35lm LED, wide angel
TDR cable test
Cable test	Testing the length of network cable (4 pairs). Resolution: 0.1 meter; Accuracy: 1 meter. The maximum length of the measured cable is 130-200 meters (depending on the wire rod).
Power supply
Charger	12V/1.5A 5.5mm round-plug power supply
Battery	Equipped with two battery compartments One special lithium battery pack can be placed in each battery compartment, with a single capacity of 18.5Wh. The combined working time is about 10 hours (it also canwork with a single battery).
Charging	12V/1.5A charging, Power: 18W,max. Charging time: 3~4 hours.
Power saving	Can set the automatic switching of overtime and display the icon of battery
Power saving	level in real-time.
System parameters
Display screen	7.0” TFT 1920RGB1200 (resolution),16.7M(color), Backlight brightness adjustable
Operation method	Power button, Master control keyboard with 13 keys, Full-fit technology capacitive Multi- touch screen (input)
Operation settings	Chinese/English interface, user optional
Automatic standby	Disabled/5-60 minutes
Keyboard	Enabled/ Disabled
tone	Enabled/ Disabled
Working environment and specifications
Working temperature	-10℃~+55℃
Working humidity	30%~90%
Outline dimension	236.5133.445.4mm
Packed weight	1.8kg